S1148-35 N92i/152 SECURE METERING MODULE (SMM) SECURITY POLICY Compiled By: W.J. HERRING PRINCIPAL ELECTRONICS DESIGN ENGINEER NEOPOST LIMITED THIS DOCUMENT MAY BE REPRODUCED OR TRANSMITTED ONLY IN ITS ENTIRETY WITHOUT REVISION Issue J - 03.03.2004 S1148-35 TITLE: N92i/152 SECURE METERING MODULE (SMM) SECURITY POLICY ABSTRACT: DATE ISSUE AMENDMENT DESCRIPTION 12.09.2001 A First Issue 22.02.2002 B Maintenance role renamed to Program Support role. Clarified definition of Program Support role in section 4.2. Included signature check in program down load rule (section 5.3.4). 22.03.2002 C N90I references added. 25.03.2002 D Correction made - N90I to N92i/152. 14.04.2003 E Modified for FIPS 140-2 and for Wrapped Meter 19.05.2003 F Additional CSP's added with descriptions 20.06.2003 G Minor changes for FIPS submission. Addition of company name to title of document 30.06.03 H Minor changes for FIPS submission. 03.02.04 I Changes per NIST/CSE Comments 03.03,04 J SMM Main software version amended to E24 Originator: Date: Authorised By: Date: Issue J - 03.03.2004 S1148-35 THIS DOCUMENT MAY BE REPRODUCED OR TRANSMITTED ONLY IN ITS ENTIRETY WITHOUT REVISION CIRCULATION LIST ORIGINATOR'S MANAGER ORIGINATOR Issue J - 03.03.2004 S1148-35 CONTENTS 1. Introduction ........................................................................................................... 1 1.1 Scope ................................................................................................................ 1 1.2 References ........................................................................................................ 1 1.3 Glossary of Names and Acronyms.................................................................... 2 1.4 SMM Version Identification................................................................................ 2 2. Security Level........................................................................................................ 2 3. SMM Overview...................................................................................................... 3 3.1 I/O Ports ............................................................................................................ 3 3.1.1 Weigh Platform Port ................................................................................... 4 3.1.2 Printer Port ................................................................................................. 4 3.1.3 Modem port ................................................................................................ 4 3.1.4 User Interface (UI) Port .............................................................................. 4 3.1.5 Print Mechanism Control Port .................................................................... 4 3.1.6 Print Mechanism Status Port ..................................................................... 4 3.1.7 Power Supply Port ..................................................................................... 5 3.2 Life Cycle States ............................................................................................... 5 4. Roles, Services and Authentication ...................................................................... 5 4.1 Neopost Administrator....................................................................................... 6 4.1.1 Commission Service .................................................................................. 6 4.1.2 Zeroise Private Key Service....................................................................... 8 4.1.3 Customer Enable Service .......................................................................... 8 4.1.4 Postal Administration Service .................................................................... 8 4.1.5 Customer Disable Service ......................................................................... 9 4.1.6 Self Test Service ........................................................................................ 9 4.2 Neopost Program Support................................................................................. 9 4.2.1 Program Download Service ....................................................................... 9 4.2 Customer ......................................................................................................... 10 4.3.1 Postal Indicium Service............................................................................ 10 4.3.2 Postal Administration Request Service.................................................... 10 4.3.3 General Postal Service ............................................................................ 10 5. Security Rules ..................................................................................................... 10 5.1 Authentication Rules ....................................................................................... 10 5.2 Key Generation................................................................................................ 11 5.3 Conditional Self Test Rules ............................................................................. 11 5.4 Power Up Self Test Rules ............................................................................... 12 5.5 CSP storage .................................................................................................... 13 5.6 Tamper Response........................................................................................... 13 5.7 Status Indication .............................................................................................. 13 5.8 Operators/Customers ...................................................................................... 14 6. Definition of Critical Security Parameters (CSP) ................................................ 15 7. Definition of CSP Modes of Access .................................................................... 16 Issue J - 03.03.2004 S1148-35 Appendix 1 ................................................................................................................. 18 Appendix 2 ................................................................................................................. 19 Appendix 3 ................................................................................................................. 20 Issue J - 03.03.2004 S1148-35 N92i/152 SECURITY POLICY 1. INTRODUCTION The N92i/152 Secure Metering Module (SMM) is a unit embedded within the Neopost IJ35 (IJ45) postal franking machine. Integrated within the SMM are a cryptographic sub function and postal services sub function. The postal services relate to the ultimate objective of the SMM which is to store postage credit belonging to a customer until it is needed by the indicium dispensing system of the franking machine. The indicia are dispensed in the form of a digitally signed image. This image is a unique bit pattern that can be determined to have originated from a particular SMM at a particular point in time. The cryptographic functions are used to restrict access to postal services and to authenticate where necessary postal service output. 1.1 SCOPE This document contains a statement of the security rules under which the SMM must operate. A number of these rules are wholly or partially a consequence of the general franking machine environment in which the SMM is intended to be placed and for this reason a brief description of this environment is included. 1.2 REFERENCES 1.2.1 Reference 1: Information Based Indicia Program (IBIP), Performance Criteria for Information Based Indicia and Security Architecture for closed IBI Postage Metering Systems (PCIBISAIBIPMS), The United States Postal Service (USPS), Draft January 12, 1999 (document number unknown). 1.2.2 Reference 2: Security Requirements for Cryptographic Modules, Federal Information Processing Standards Publication 140-2 1.2.3 Reference 3: Digital Signature Standard (DSS), Federal Information Processing Standards Publication 186-2 1.2.4 Reference 4: Secure Hash Standard, Federal Information Processing Standards Publication 180-1 Issue J - 03.03.2004 1 S1148-35 1.3 GLOSSARY OF NAMES AND ACRONYMS DSA Digital Signature Algorithm (Reference 3) G DSA common parameter G I/O Input / Output MTBF Mean time between failures NVEM Non Volatile Electronic Memory P DSA common parameter P Q DSA common parameter Q RNG Random number generator SHA-1 Secure Hash Algorithm (reference 4) SMM Secure Metering Module CSP Critical Security Parameter USPS United States Postal Service (reference 1) X DSA private key Y DSA public key 1.4 SMM VERSION IDENTIFICATION Hardware 3000186T A Software 3800157W E24(Main) 3800159Y E (Coprocessor) 2. SECURITY LEVEL The SMM is a multi-chip embedded cryptographic module as defined in reference (2). The SMM shall meet the overall requirements for Level 3 security as defined in reference (2). The following table shows the security level requirement, as defined in reference (2), for each area of the SMM: - Level Cryptographic Module 3 Cryptographic Module Ports and 3 Interfaces Roles, Services and Authentication 3 Finite State Machine 3 Physical Security 3+ EFP/EFT Operational Environment N/A Cryptographic Key Management 3 EMI/EMC 3 Self Tests 4 Design Assurance 3 Mitigation of Other Attacks N/A N/A = not applicable Issue J - 03.03.2004 2 S1148-35 3. SMM OVERVIEW Figure 1 The SMM (figure 1) consists of a cryptographic sub function and postal services sub function sharing common hardware that is contained on a printed circuit board and enclosed within a tamper responsive enclosure. This enclosure constitutes the cryptographic physical boundary. The SMM contains dual redundant non-volatile electronic memories, which enables both critical security parameters and postal related data items to be stored in duplicate if required. Duplicate storage is typically used to increase MTBF. The SMM will input and output authenticated data that requires the services of the cryptographic sub function. The SMM will also input and output certain other data that has no security implications and that is permitted to pass freely across the cryptographic physical boundary. This latter data relates to the general control and use of the franking machine in which the SMM is embedded. The SMM has only a FIPS mode, it does not support any non-FIPS mode of operation. The SMM is not designed to mitigate specific attacks outside of FIPS 140-2 (reference 2). 3.1 I/O PORTS A number of data channels extend outside the enclosure via specific pins on a single multi pin connector. Each of these pin groups has a predefined use (appendix 3) and are henceforth regarded as a port. The ports are described in the following with respect to their use inside the SMM up to the point at which they enter/exit the physical enclosure. However for convenience of reference they are named according to their typical use externally to the SMM: - Issue J - 03.03.2004 3 S1148-35 3.1.1 Weigh Platform Port This is a serial communication port. Both authenticated and non- authenticated data will be input/output through this port. This port is so named, as externally to the SMM it is the only connection that will support a weigh platform. The port will also however support connection to either a PC or stand alone scale via an RS232 link. 3.1.2 Printer Port This is a serial communication port. Both authenticated and non- authenticated data will be input/output through this port. This port is so named, as externally to the SMM it is the only connection that will support a printer. The port will also however support connection to either a PC or stand alone scale via an RS232 link. 3.1.3 Modem port This is a serial communication port whose operation and role is the same as that described for the general port. This port is so named as externally to the SMM its normal purpose is to interface via a Modem. 3.1.4 User Interface (UI) Port This is a serial communication port whose operation and role is the same as that described for the General port. This port is so named as externally to the SMM its normal purpose is to link to a user interface unit that comprises keyboard, display and memory card reader. 3.1.5 Print Mechanism Control Port This is an output only data port whose only function is to output authenticated postal indicium. 3.1.6 Print Mechanism Status Port This is an input only data port. No authenticated data is received via this port. The port inputs only non-security critical indicium dispensing progress data. Issue J - 03.03.2004 4 S1148-35 3.1.7 Power Supply Port This is an input only port, which provides for the supply of power to the module firmware. 3.2 LIFE CYCLE STATES The SMM assumes one of four main overall states during its life cycle. These states are relevant to the accessibility of cryptographic services. The states are: - Not Commissioned · This is the default at manufacture. The SMM does not contain the cryptographic parameters necessary to support interaction with the Neopost Postal Administration Infrastructure. A factory initialisation is required. Commissioned · The SMM contains the cryptographic parameters necessary to support interaction with the Neopost Postal Administration Infrastructure but has not yet been registered with this Enabled infrastructure. Customer · The SMM is registered with the Neopost Postal Administration Infrastructure and will perform postal functions. Customer disabled · The SMM is de registered from the Neopost Postal Administration Infrastructure and will not perform postal functions. It cannot be re commissioned until it has undergone a factory initialisation, which will reconfigure the contents of the SMM system memory. 4. ROLES, SERVICES AND AUTHENTICATION The SMM shall support three distinct operators. The SMM shall enforce separation of entities using identity-based authentication and by restricting the services available to each entity. Also some services are state dependent. The allowable operators are the Neopost Program Support, the Neopost Administrator and the Customer: - The SMM supports the Crypto Officer and User roles referred to in Reference 2. Both the Crypto Officer and User roles are accessed by the Neopost Administrator; for the sake of brevity the remainder of this document simply references the Neopost Administrator when discussing both the Crypto Officer and User roles as both roles authenticate in the same manner and have access to the same set of services. Issue J - 03.03.2004 5 S1148-35 For identity based authentication the ID must first have been selected and then all input data must be accompanied by a cryptographic signature, which is derived from the input data, and from cryptographic parameters unique to that entity. The cryptographic parameters used must already be present in the SMM. For the Program support and Administrator the cryptographic parameters must be input subsequent to manufacture. Where services have a state dependency then the SMM must be first placed into an appropriate life cycle state. The relationship between SMM services and state is summarised in Appendix 1. The relationship between SMM services and authenticated entities are summarised in Appendix 2. 4.1 NEOPOST ADMINISTRATOR The Neopost Administrator shall provide the services required to commission and maintain the parameters within the SMM that are necessary for interaction with the Neopost metering infrastructure. The Neopost Administrator shall also provide those services necessary to control, sustain, and monitor the postal operation of an SMM (i.e. installation, postage funding, usage auditing, withdrawal, etc.). These shall require the identity of the operator to be provided and authenticated. The Neopost Administrator services are:- 4.1.1 Commission Service This service will carry out the following: - · Input a non-authenticated message containing a Neopost X509 certificate which will include the public key (Y) and DSA common parameters (PQG) corresponding to the Administrator. · Verify that the SMM is in the appropriate state for acceptance of a `Commission' service request (Appendix 1). · Extract and store the PQGY values. · Generate and store a new SMM public (Y) key based upon the newly input PQG and the SMM private key. · Authenticate and output a message containing the SMM public key (Y). Issue J - 03.03.2004 6 S1148-35 · Set the SMM state to `Commissioned' so as to enable the Administrator. Issue J - 03.03.2004 7 S1148-35 4.1.2 Zeroise Private Key Service This service will carry out the following: - · Input an non-authenticated message containing a request to zero the current private key. · Verify that the SMM is in the appropriate state for acceptance of a `Commission' service request (Appendix 1). · Zero all CSP's (i.e. including the private key). 4.1.3 Customer Enable Service This service will: - · Input an authenticated message containing postal critical data items, plus an X509 Certificate containing a certified SMM public key. · Verify the authentication. · Verify that the SMM is in the appropriate state for acceptance of a `Customer Enable' service request. · Extract and store the postal data items. · Extract and store the X509 SMM public key Certificate. · Set the SMM state `Customer Enabled'. 4.1.4 Postal Administration Service This service will: - · Input an authenticated message containing a postal function command and optionally accompanied by postal critical data items required by the function. · Verify the authentication. · Verify that the SMM is in the appropriate state for acceptance of a `Postal Admin' service request. · Perform the specified postal function using the optionally provided postal data as required. Issue J - 03.03.2004 8 S1148-35 4.1.5 Customer Disable Service This service will: - · Input an authenticated message requesting that the SMM set itself to the `Customer Disabled' state. · Verify the authentication. · Verify that the SMM is in the appropriate state for acceptance of a `Customer Disable' service request. · Authenticate and output a message containing specific postal critical data items required by Neopost before an SMM is disabled. · Set the SMM state `Customer Disabled' thereby inhibiting further access to the Administrator services and certain postal critical customer role services. 4.1.6 Self Test Service This service will perform those self tests required by reference 2. The SMM performs the tests automatically and no authentication is required. 4.2 NEOPOST PROGRAM SUPPORT Neopost Program Support shall provide the services required to input new or replacement program files into the SMM. The Neopost Program Support services are:- 4.2.1 Program Download Service This service will: - · Input an authenticated message containing a sub section of executable program code (several messages may be required in order to assemble a complete program). · Verify the authentication. · Assemble the program code as a replacement (when complete) for the original program. Issue J - 03.03.2004 9 S1148-35 4.2 CUSTOMER These services are available on behalf of the Neopost Administrator. They all require the SMM to be in an appropriate state. The services are: - 4.3.1 Postal Indicium Service This service requests printing of a postal indicium. 4.3.2 Postal Administration Request Service This service requests that the Neopost Administrator authenticate to the meter and perform appropriate authenticated operations. 4.3.3 General Postal Service This service requests status output. 5. SECURITY RULES 5.1 AUTHENTICATION RULES 5.1.1 The SMM shall provide three distinct operators, the Neopost Program Support, Neopost Administrator and the Customer. 5.1.2 The SMM shall provide identity-based authentication. 5.1.3 Message authenticating signatures shall be 40 byte codes derived using the DSA algorithm, as described in reference 3, using 1024 bit common parameters (PQG). Random number generation employed by the DSA shall be according to reference (3) Note that there will be only one random number implementation but with two separate states maintained, i.e. one for DSA signatures and one for generation of keys. 5.1.4 The cryptographic parameters (PQGY) for each identity authenticated shall be independent and shall be stored in predetermined fixed locations within the SMM. These shall be able to be super-seeded by subsequent input values if required. The parameters for the Administrator and Program Support must be input after manufacture. 5.1.5 The SMM shall authenticate exported data with 40 byte codes derived using the DSA algorithm, as described in reference 3, Issue J - 03.03.2004 10 S1148-35 using 1024 bit common parameters (PQG). Random number generation employed by the DSA shall be according to (3) 5.1.6 For any attempt to use the authentication mechanism then the probability that a random attempt will be accepted or that a false acceptance will occur will be at least 1 in 280 (equivalent to at least 12 x 1023). The DSA key is 160 bits and is considered to have at least 80 bits of strength. This is considerably more difficult to break than the 1 in 1,000,000 requirement. 5.1.7 The minimum time to generate an authentication shall be 100ms. For multiple attempts to use the authentication mechanism then the probability that a random attempt will be accepted or that a false acceptance will occur will be 1 in 280 divided by 600 (equivalent to 2 x 1021). This is considerably more difficult to break than the 1 in 100,000 requirement. 5.2 KEY GENERATION 5.2.1 The SMM DSA Private key shall be generated according section 3.1 and 3.3 of reference (3). Note that there will be only one random number implementation but with two separate states maintained, i.e. one for DSA signatures and one for generation of keys. 5.2.2 The SMM DSA public key corresponding to its the private key shall be calculated according to the relationship for derivation of a DSA public key defined in reference 3. 5.2.3 During private/public key pair generation data output from the SMM shall be inhibited. 5.3 CONDITIONAL SELF TEST RULES 5.3.1 If the key pair is invalid then both the SMM private key and public key shall be erased (to zero) and the SMM shall inhibit. The validity of a key pair shall be determined by a pair wise consistency check, i.e. the calculation and verification of a signature. This check shall be performed at the generation of each new key pair and at power up. 5.3.2 For both the private key and signature random number generators, the SMM shall perform the continuous random number generator test, as defined in reference 2 for conditional Issue J - 03.03.2004 11 S1148-35 self tests, for every number generated and inhibit if its random number generator fails to a constant value. 5.3.3 For the private key random number generator, the SMM shall perform the statistical tests for randomness as defined by reference (2) upon demand (i.e. when the module is requested to generate a private key). The SMM shall inhibit if the test fails. (These tests are no longer actually required by NIST). 5.3.4 The SMM shall validate the integrity of any program file being down loaded by authenticating the attached DSA signatures of all program segments received. The SMM shall not store any program segment that has an invalid authentication. The SMM shall further test the contents of the overall down loaded program file by calculating the 16 bit checksum (sum of bytes) of the contents and comparing the result with a known answer. The SMM shall refuse to execute such a program if the test fails. 5.4 POWER UP SELF TEST RULES 5.4. 1 The SMM shall test the operation of RAM areas used for secure operations at power up. The SMM shall inhibit if the test fails. 5.4.2 The SMM shall test the contents of it's program memory area at power up by calculating the 16 bit checksum (sum of bytes) of the contents and comparing the result with a known answer. The SMM shall inhibit if the test fails. 5.4.3 The SMM shall test the accessibility and validity of all CSP values in NVEM at power up. If any are not accessible (i.e. device failure) or contain erroneous data then the SMM shall inhibit. 5.4.4 The SMM shall test the DSA algorithm at power up by performing a known answer test for both signing and verification using predetermined data embedded into the SMM firmware. Known answer testing of the secure hash algorithm (SHA-1) and for the authentication random number generator (PRNG) shall be inclusive within the DSA test. The SMM shall inhibit if the test fails. Note that the PRNG will have two separate states, i.e. one for DSA signatures and one for key generation. The states only differ by the maintenance of separate generator seeds. Hence the test suffices for both states. 5.4.5 For the signature random number generator, the SMM shall perform the statistical tests for randomness as defined by reference (2) at power up. The SMM shall inhibit if the test fails. (These tests are no longer actually required by NIST). Issue J - 03.03.2004 12 S1148-35 If the module encounters an RNG error state, the statistical tests will be available and repeated upon demand. 5.4.6 The public key for each identity (administrator and program support) shall be stored along with an authenticating signature which shall be calculated using the SMM's private key. If this signature fails to be verified at power up then the public key for each identity shall be erased (to zero) and the SMM shall inhibit. The validity of a key pair shall be determined by a pair wise consistency check, i.e. the calculation and verification of a signature. This check shall be performed at the generation of each new key pair and at power up. 5.5 CSP STORAGE 5.5.1 The SMM shall detect data corruption of the value held for any particular CSP by the incorporation of 16 bit error detection data. 5.5.2 Any CSP access failure shall cause the SMM to inhibit. Exit from the inhibit condition shall require the SMM to re check access to, and the values of, all CSP. 5.6 TAMPER RESPONSE 5.6.1 The DSA private key, the random number generator seed, and the last random number, shall be erased (to zero) should the SMM physical cryptographic boundary be breached. At the same time the SMM shall enter an inhibited state. 5.6.2 The DSA private key, the random number generator seed, and the last random number, shall be erased (to zero) if the temperature inside the SMM covers exceeds 77 degrees Centigrade. At the same time the SMM shall enter an inhibited state. 5.6.3 The private key shall not be exported under any circumstances. 5.7 STATUS INDICATION 5.7.1 The following `module not ready' module states shall be indicated: - · Private key zeroed · Private/Public key pair invalid (module not initialised) · Tamper mechanism tampered Issue J - 03.03.2004 13 S1148-35 · Neopost Program Support/Neopost Administrator public key authorisation signature invalid. Indication will be via a unique text message output by the module suitable for viewing on an alphanumeric display device. The absence of one of these messages indicates that the module is in a `ready' state. 5.7.2 The following `module inhibited' error conditions shall be indicated: - · DSA error · RNG error · Firmware / RAM error · High temperature detected error Indication will be via a unique text message output by the module suitable for viewing on an alphanumeric display device. The absence of one of these messages indicates that the module does not have an error condition, and that self-tests have executed successfully 5.7.3 The module shall indicate the currently active role. Indication will be via a unique text message output by the module suitable for viewing on an alphanumeric display device. . 5.8 OPERATORS/CUSTOMERS 5.8.1 Operators/customers shall be instructed to check for any errors, indicated by the status output, or for tamper evidence. Detection of any such errors or tamper evidence shall be required to be reported to Neopost such that the return of the SMM to the factory environment for decommissioning can be arranged. Issue J - 03.03.2004 14 S1148-35 6. DEFINITION OF CRITICAL SECURITY PARAMETERS (CSP) The following table describes each CSP maintained by the SMM: - CSP NAME DESCRIPTION DSA random Current state of the seed value used by the random number number 1 seed generator during signature generation. There is only one PRNG implementation with two separate states, i.e. one for DSA signatures (state 1) and one for generation of keys (state 2). This seed represents the state for the generation of signatures. DSA random Current state of the seed value used by the random number number 2 seed generator during key generation. There is only one PRNG implementation with two separate states, i.e. one for DSA signatures (state 1) and one for generation of keys (state 2). This seed represents the state for the generation of keys. SMM DSA The SMM private DSA key used to authenticate messages and data private key output from the SMM. DSA K value Current random number derived from the `DSA random number 1 seed' by PRNG state 1 and used during DSA signature generation. Previous DSA K Previous random number derived from the `DSA random number 1 value seed' and used during continuous testing of the PRNG state 1 to ensure that consecutive random numbers are not equal. Previous DSA X Previous random number derived from the `DSA random number 2 value seed' and used during continuous testing of the PRNG state 2 to ensure that consecutive random numbers are not equal. The following table describes public key parameters of the SMM:- NAME DESCRIPTION Neopost Public key used for the verification of authenticated messages input Administration from the Neopost Administration server. DSA public key Neopost Common cryptographic DSA parameter (P) associated with the Administration Neopost Administration services. DSA common P Neopost Common cryptographic DSA parameter (Q) associated with the Administration Neopost Administration services. DSA common Q Neopost Common cryptographic DSA parameter (G) associated with the Administration Neopost Administration services. DSA common G Neopost Program Public key used for the verification of authenticated messages input Support DSA from the Neopost Program Support server. public key Neopost Program Common cryptographic DSA parameter (P) associated with the Support DSA Neopost Program Support services. common P Neopost Program Common cryptographic DSA parameter (Q) associated with the Support DSA Neopost Program Support services. common Q Neopost Program Common cryptographic DSA parameter (G) associated with the Support DSA Neopost Program Support services. common G SMM DSA public DSA Public key of the SMM. Available to any operator with a need to key verify authenticated data output by the SMM. Issue J - 03.03.2004 15 S1148-35 7. DEFINITION OF CSP MODES OF ACCESS The section describes how CSP are accessed by the services that can be activated by an operator. The modes of access are defined as follows: - R The data item will be read for internal use. E The data item will be read and exported. W The data item will be updated directly from an imported value. M The data item will be modified to a value created by an internal process. Z The data item will be zeroed. S The data item will be initialised to a starting value created by an internal process. I The data item will be initialised to a benign value (typically zeroed). The following table summarises the relationship between all CSP maintained by the SMM and the services that access them: - Service Name 8 Postal Administration Postal Administration Zeroise Private Key Program Download Customer Disable Customer Enable Postal Indicium General Postal Commission Self Test Request CSP Name 6 DSA random number 1 seed s z m m m DSA random number 2 seed s z m SMM DSA private key s z r r r DSA K value z m m m Previous DSA K value z m m m Previous DSA X value s z Issue J - 03.03.2004 16 S1148-35 The following table summarises the service relationships for public key parameters maintained by the SMM - Service Name 8 Postal Administration Postal Administration Zeroise Private Key Program Download Customer Disable Customer Enable Postal Indicium General Postal Commission Self Test Request Public Key Parameter Name 6 SMM DSA public key s r Neopost Administration DSA public key w r r r Neopost Administration DSA common P w r r r r r r Neopost Administration DSA common Q w r r r r r r Neopost Administration DSA common G w r r r r r r Neopost Program Support DSA public key r Neopost Program Support DSA common P r Neopost Program Support DSA common Q r Neopost Program Support DSA common G r Issue J - 03.03.2004 17 S1148-35 APPENDIX 1 The following table summarises the legality of services according to the prevailing life cycle state of an SMM: - SMM STATE 4 CUSTOMER DISABLED CUSTOMER ENABLED NOT COMMISSIONED COMMISSIONED SERVICE 6 Zeroise Private Key a a Commission a Customer Enable a Postal Administration a Customer Disable a Program Down load a a a a Postal Indicium a Administration Request a General Postal a a a a Self Test a a a a A service is not permitted for a particular state unless indicated: - a = permitted Issue J - 03.03.2004 18 S1148-35 APPENDIX 2 The following table summarises the relationship between services and operators for the SMM: - OPERATOR8 ADMINISTRATOR CUSTOMER PROGRAM SUPPORT SERVICE 6 Zeroise Private Key a Commission a Customer Enable a Postal Administration a Customer Disable a Program Down load a Postal Indicium a Administration Request a General Postal a Self Test a a a Service is not accessible to a particular entity unless specifically indicated:- a = can be accessed Issue J - 03.03.2004 19 S1148-35 APPENDIX 3 The following table summarises the SMM ports on which services are permitted to be active. These ports are each a specific group of pins on the single multi pin connector provided for data access to the SMM: - PORT8 PLATFORM PORT POWER SUPPLY CONTROL PORT PRINTER PORT STATUS PORT MODEM PORT MECHANISM MECHANISM SERVICE 6 UI PORT WEIGH PRINT PRINT PORT Zeroise a a a a Commission a a a a Customer Enable a a a a Postal Administration a a a a Customer Disable a a a a Program Down load a a a a Postal Indicium a a Administration Request a a a a General Postal a a Self Test NA NA NA NA NA NA a A service is not permitted via a port unless specifically indicated: - a = permitted WJH / JF 30.06.2003 Issue J - 03.03.2004 20