Cisco 1905, Cisco 1921, Cisco 1941, Cisco 2901, Cisco 2911, and Cisco 2921 Integrated Services Routers (ISRs) Hardware versions: Hardware Versions: 1905[1][2], 1921[1][2], 1941[1][2], 2901[1][3], 2911[1][4], 2921[1][5], FIPS Kit (CISCO-FIPS-KIT=), Revision -B0[1], ISR: FIPS- SHIELD-1900=[2], FIPS-SHIELD-2901=[3], FIPS-SHIELD- 2911=[4] and FIPS-SHIELD-2921=[5] Firmware version: 15.1(2)T2A FIPS 140-2 Non-Proprietary Security Policy Overall Level 2 (Sections 3 and 10 Level 3) Validation Version 0.10 March 2011 Introduction......................................................................................................................... 3   References....................................................................................................................... 3   FIPS 140-2 Submission Package .................................................................................... 3   Module Description ............................................................................................................ 4   Cisco 1905, Cisco 1921, Cisco 1941, Cisco 2901, Cisco 2911, and Cisco 2921 Integrated Services Routers (ISRs)................................................................................. 4   Module Validation Level ................................................................................................ 4   Cryptographic Boundary..................................................................................................... 6   Cryptographic Module Ports and Interfaces ....................................................................... 6   Roles, Services, and Authentication ................................................................................. 11   User Services ................................................................................................................ 11   Cryptographic Officer Services .................................................................................... 12   Unauthenticated User Services ..................................................................................... 12   Cryptographic Key/CSP Management.............................................................................. 13   Cryptographic Algorithms ................................................................................................ 17   Approved Cryptographic Algorithms ........................................................................... 17   Non-Approved Algorithms ........................................................................................... 17   Self-Tests ...................................................................................................................... 17   Physical Security............................................................................................................... 19   Module Opacity and Tamper Evidence ........................................................................ 19   Secure Operation............................................................................................................... 37   Initial Setup................................................................................................................... 37   System Initialization and Configuration ....................................................................... 37   IPSec Requirements and Cryptographic Algorithms.................................................... 38   Protocols ....................................................................................................................... 38   Remote Access.............................................................................................................. 38   Wireless Services .......................................................................................................... 38   Cisco Unified Border Element (CUBE) TLS Configuration........................................ 39   Related Documentation..................................................................................................... 40   Obtaining Documentation................................................................................................. 40   Cisco.com...................................................................................................................... 40   Product Documentation DVD....................................................................................... 40   Ordering Documentation .............................................................................................. 40   Documentation Feedback ................................................................................................. 41   Cisco Product Security Overview..................................................................................... 41   Reporting Security Problems in Cisco Products........................................................... 41   Obtaining Technical Assistance........................................................................................ 42   Cisco Technical Support & Documentation Website ................................................... 42   Submitting a Service Request ....................................................................................... 43   Definitions of Service Request Severity ....................................................................... 43   Obtaining Additional Publications and Information......................................................... 44   Definition List................................................................................................................... 45   2 Introduction This is a non-proprietary Cryptographic Module Security Policy for the Cisco 1905, Cisco 1921, Cisco 1941, Cisco 2901, Cisco 2911, and Cisco 2921 Integrated Services Routers (ISRs) from Cisco Systems, Inc. (Hardware Versions: Hardware Versions: 1905[1][2], 1921[1][2], 1941[1][2], 2901[1][3], 2911[1][4], 2921[1][5], FIPS Kit (CISCO-FIPS-KIT=), Revision -B0[1], ISR: FIPS-SHIELD-1900=[2], FIPS-SHIELD- 2901=[3], FIPS-SHIELD-2911=[4] and FIPS-SHIELD-2921=[5]; Firmware Version: IOS 15.1(2)T2A), referred to in this document as the modules, routers, or by their specific model name. This security policy describes how modules meet the security requirements of FIPS 140-2 and how to run the modules in a FIPS 140-2 mode of operation. FIPS 140-2 (Federal Information Processing Standards Publication 140-2 — Security Requirements for Cryptographic Modules) details the U.S. Government requirements for cryptographic modules. More information about the FIPS 140-2 standard and validation program is available on the NIST website at http://csrc.nist.gov/groups/STM/cmvp/index.html. References This document deals only with operations and capabilities of the module in the technical terms of a FIPS 140-2 cryptographic module security policy. More information is available on the module from the following sources: The Cisco Systems website (http://www.cisco.com) contains information on the • full line of products from Cisco Systems. The NIST Cryptographic Module Validation Program website • (http://csrc.nist.gov/groups/STM/cmvp/index.html) contains contact information for answers to technical or sales-related questions for the module. FIPS 140-2 Submission Package The security policy document is one document in a FIPS 140-2 Submission Package. In addition to this document, the submission package includes: Vendor Evidence • Finite State Machine • Other supporting documentation as additional references • With the exception of this non-proprietary security policy, the FIPS 140-2 validation documentation is proprietary to Cisco Systems, Inc. and is releasable only under appropriate non-disclosure agreements. For access to these documents, please contact Cisco Systems, Inc. See “Obtaining Technical Assistance” section for more information. 3 Module Description Cisco 1905, Cisco 1921, Cisco 1941, Cisco 2901, Cisco 2911, and Cisco 2921 Integrated Services Routers (ISRs) The Cisco 1905, Cisco 1921, Cisco 1941, Cisco 2901, Cisco 2911, and Cisco 2921 Integrated Services Routers (ISRs) are routing platforms that provides VPN functionality, as well as, SIP Gateway Signaling Over TLS Transport. The Cisco 1905, Cisco 1921, Cisco 1941, Cisco 2901, Cisco 2911, and Cisco 2921 Integrated Services Routers (ISRs) provide connectivity and security services in a single, secure device. These routers offer broadband speeds and simplified management to small businesses, and enterprise small branch and teleworkers. In support of the routing capabilities, the Cisco 1905, Cisco 1921, Cisco 1941, Cisco 2901, Cisco 2911, and Cisco 2921 Integrated Services Routers (ISRs) provide IPSec, GetVPN (GDOI), and SSL v3.1 connection capabilities for VPN enabled clients connecting through the Cisco 1905, Cisco 1921, Cisco 1941, Cisco 2901, Cisco 2911, and Cisco 2921 Integrated Services Routers (ISRs). The tested platforms consist of the following components: Cisco 1905 ISR • Cisco 1921 ISR • Cisco 1941 ISR • Cisco 2901 ISR • Cisco 2911 ISR • Cisco 2921 ISR • Model Firmware Cisco 1905 ISR 15.1(2)T2A Cisco 1921 ISR 15.1(2)T2A Cisco 1941 ISR 15.1(2)T2A Cisco 2901 ISR 15.1(2)T2A Cisco 2911 ISR 15.1(2)T2A Cisco 2921 ISR 15.1(2)T2A Table 1: Module Hardware Configurations Module Validation Level The following table lists the level of validation for each area in the FIPS PUB 140-2. No. Area Title Level 1 Cryptographic Module Specification 2 2 Cryptographic Module Ports and Interfaces 2 3 Roles, Services, and Authentication 3 4 Finite State Model 2 5 Physical Security 2 6 Operational Environment N/A 4 7 Cryptographic Key management 2 8 Electromagnetic Interface/Electromagnetic Compatibility 2 9 Self-Tests 2 10 Design Assurance 3 11 Mitigation of Other Attacks N/A Overall Overall module validation level 2 Table 2: Module Validation Level 5 Cryptographic Boundary The cryptographic boundary for the Cisco 1905, Cisco 1921, Cisco 1941, Cisco 2901, Cisco 2911, and Cisco 2921 Integrated Services Routers (ISRs) is defined as encompassing the "top," "front," "left," "right," and "bottom" surfaces of the case; all portions of the "backplane" of the case which are not designed to accommodate a removable port adapter; and space within the case that would be occupied by an installed port adapter. The cryptographic boundary includes special FIPS opacity shields, the connection apparatus between the port adapter, and the board that hosts the port adapter, but the boundary does not include the port adapter itself. In other words, the cryptographic boundary encompasses all hardware components within the chassis except any installed non approved cryptographic network modules or service modules and the power supply sub modules. Cryptographic Module Ports and Interfaces Each module provides a number of physical and logical interfaces to the device, and the physical interfaces provided by the module are mapped to four FIPS 140-2 defined logical interfaces: data input, data output, control input, and status output. The logical interfaces and their mapping are described in the following tables: Physical Interfaces FIPS 140-2 Logical Interfaces EHWIC Slot Data Input Interface 10/100/1000 Ports (2) Console Port USB Console Port Auxiliary Port EHWIC Slots Data Output Interface 10/100/1000 Ports (2) Console Port USB Console Port Auxiliary Port EHWIC Slots Control Input Interface 10/100/1000 Ports (2) Console Port USB Console Port Auxiliary Port Reset Button Serial Port Activity LED Status Output Interface System LED Compact Flash LED (2) RPS Boost LED Power LED (2) Console Port Auxiliary Port USB Console Port Serial Port Power Plug Power interface PoE Port Table 3: Cisco 1905 ISR Interfaces 6 Physical Interfaces FIPS 140-2 Logical Interfaces EHWIC Slots (2) Data Input Interface 10/100/1000 Ports (2) Console Port USB Console Port Auxiliary Port EHWIC Slots (2) Data Output Interface 10/100/1000 Ports (2) Console Port USB Console Port Auxiliary Port EHWIC Slots (2) Control Input Interface 10/100/1000 Ports (2) Console Port USB Console Port Auxiliary Port Reset Button Activity LED Status Output Interface System LED Compact Flash LED (2) RPS Boost LED Power LED (2) Console Port Auxiliary Port USB Console Port Power Plug Power interface PoE Port Table 4: Cisco 1921 ISR Interfaces Physical Interfaces FIPS 140-2 Logical Interfaces EHWIC Slots (2) Data Input Interface GigE Ports (2) Console Port USB Console Port Auxiliary Port EHWIC Slots (2) Data Output Interface GigE Ports (2) Console Port USB Console Port Auxiliary Port EHWIC Slots (2) Control Input Interface GigE Ports (2) Console Port USB Console Port Auxiliary Port Activity LED Status Output Interface System LED GigE Link LED (1 per GigE port) GigE Speed LED (1 per GigE port) Compact Flash LED (2) WLAN LED RPS Boost LED Power LED (2) GigE ports (2) Console Port 7 Physical Interfaces FIPS 140-2 Logical Interfaces Auxiliary Port USB Console Port Power Plug Power interface PoE Port Table 5: Cisco 1941 ISR Interfaces Physical Interfaces FIPS 140-2 Logical Interfaces EHWIC Slots (4) Data Input Interface GigE Ports (2) Console Port USB Console Port Auxiliary Port EHWIC Slots (4) Data Output Interface GigE Ports (2) Console Port USB Console Port Auxiliary Port EHWIC Slots (4) Control Input Interface GigE Ports (2) Console Port USB Console Port Auxiliary Port Activity LED Status Output Interface System LED GigE Link LED (1 per GigE port) GigE Speed LED (1 per GigE port) Compact Flash LED (2) RPS Boost LED Power LED (2) GigE ports (2) Console Port Auxiliary Port USB Console Port Power Plug Power interface PoE Port Table 6: Cisco 2901 ISR Interfaces Physical Interfaces FIPS 140-2 Logical Interfaces EHWIC Slots (4) Data Input Interface SM Slot (1) GigE Ports (3) Console Port USB Console Port Auxiliary Port EHWIC Slots (4) Data Output Interface SM Slot (1) GigE Ports (3) Console Port USB Console Port Auxiliary Port EHWIC Slots (4) Control Input Interface SM Slot (1) GigE Ports (3) 8 Physical Interfaces FIPS 140-2 Logical Interfaces Console Port USB Console Port Auxiliary Port Activity LED Status Output Interface System LED GigE Link LED (1 per GigE port) GigE Speed LED (1 per GigE port) SM LED Compact Flash LED (2) RPS Boost LED Power LED (2) GigE ports (3) Console Port Auxiliary Port USB Console Port Power Plug Power interface PoE Port Table 7: Cisco 2911 ISR Interfaces Physical Interfaces FIPS 140-2 Logical Interfaces EHWIC Slots (4) Data Input Interface SM Slot (1) GigE Ports (3) Console Port USB Console Port Auxiliary Port EHWIC Slots (4) Data Output Interface SM Slot (1) GigE Ports (3) Console Port USB Console Port Auxiliary Port EHWIC Slots (4) Control Input Interface SM Slot (1) GigE Ports (3) Console Port USB Console Port Auxiliary Port Activity LED Status Output Interface System LED GigE Link LED (1 per GigE port) GigE Speed LED (1 per GigE port) SM LED Compact Flash LED (2) RPS Boost LED Power LED (2) GigE ports (3) Console Port Auxiliary Port USB Console Port Power Plug Power interface PoE Port Table 8: Cisco 2921 ISR Interfaces 9 NOTE: The 1941 ISR module includes three Antenna Connectors. These connectors are disabled by covering with Tamper Evident Labels (TELs) while operating in FIPS-mode. NOTE: Each module includes two USB ports and two compact flash slots. These ports and slots are disabled by covering with TELs while operating in FIPS-mode. 10 Roles, Services, and Authentication Authentication is identity-based. Each user is authenticated upon initial access to the module. There are two roles in the router that operators may assume: the Crypto Officer role and the User role. The administrator of the router assumes the Crypto Officer role in order to configure and maintain the router using Crypto Officer services, while the Users exercise only the basic User services. The module supports RADIUS and TACACS+ for authentication. A complete description of all the management and configuration capabilities of the modules can be found in the IOS version 12.4T Configuration Guide Manual and in the online help for the modules. The User and Crypto Officer passwords and all shared secrets must each be at least eight (8) characters long, including at least one letter and at least one number character, in length (enforced procedurally). The maximum length of passwords is 25 characters. See the Secure Operation section for more information. If six (6) integers, one (1) special character and one (1) alphabet are used without repetition for an eight (8) digit PIN, the probability of randomly guessing the correct sequence is one (1) in 832,000,000. In order to successfully guess the sequence in one minute would require the ability to make over 13,000,000 guesses per second, which far exceeds the operational capabilities of the module. Including the rest of the alphanumeric characters drastically decreases the odds of guessing the correct sequence.” Additionally, when using RSA based authentication, RSA key pair has modulus size of 1024 bit to 2048 bit, thus providing between 80 bits and 112 bits of strength. Assuming the low end of that range, an attacker would have a 1 in 280 chance of randomly obtaining the key, which is much stronger than the one in a million chance required by FIPS 140-2. To exceed a one in 100,000 probability of a successful random key guess in one minute, an attacker would have to be capable of approximately 1.8x1021 attempts per minute, which far exceeds the operational capabilities of the modules to support. User Services A User enters the system by accessing the console/auxiliary port with a terminal program or SSH v2 session to a LAN port. The module prompts the User for their username/password combination. If the username/password combination is correct, the User is allowed entry to the module management functionality. The services available to the User role consist of the following: Status Functions - View state of interfaces and protocols, firmware version • Network Functions - Connect to other network devices and initiate diagnostic • network services (i.e., ping, mtrace). Terminal Functions - Adjust the terminal session (e.g., lock the terminal, adjust • flow control) Directory Services - Display directory of files kept in memory • Perform Self-Tests – Perform the FIPS 140 start-up tests on demand • 11 VPN functions - Negotiation and encrypted data transport via VPN • Cryptographic Officer Services A Crypto Officer enters the system by accessing the console/auxiliary port with a terminal program or SSH v2 session to a LAN port. The Crypto Officer authenticates as a User and then authenticates as the Crypto Officer role. During initial configuration of the router, the Crypto Officer password (the “enable” password) is defined. A Crypto Officer may assign permission to access the Crypto Officer role to additional accounts, thereby creating additional Crypto Officers. The Crypto Officer role is responsible for the configuration and maintenance of the router. The Crypto Officer services consist of the following: Configure the module - Define network interfaces and settings, create command • aliases, set the protocols the router will support, enable interfaces and network services, set system date and time, and load authentication information. Define Rules and Filters - Create packet Filters that are applied to User data • streams on each interface. Each Filter consists of a set of Rules, which define a set of packets to permit or deny based characteristics such as protocol ID, addresses, ports, TCP connection establishment, or packet direction. Status Functions - View the module configuration, routing tables, active sessions, • use get commands to view SNMP MIB statistics, health, temperature, memory status, voltage, packet statistics, review accounting logs, and view physical interface status. Manage the module - Log off users, shutdown or reload the router, manually back • up router configurations, view complete configurations, manager user rights, initiate power-on self tests on demand and restore router configurations. Set Encryption/Bypass - Set up the configuration tables for IP tunneling. Set keys • and algorithms to be used for each IP range or allow plaintext packets to be set from specified IP address. Perform Self-Tests – Perform the FIPS 140 start-up tests on demand • The Crypto Officer also has access to all User services. • Unauthenticated User Services The services for someone without an authorized role are to view the status output from the module’s LED, perform bypass services and cycle power. 12 Cryptographic Key/CSP Management The module securely administers both cryptographic keys and other critical security parameters such as passwords. The tamper evidence seals provide physical protection for all keys. All keys are also protected by the password-protection on the Crypto Officer role login, and can be zeroized by the Crypto Officer. All zeroization consists of overwriting the memory that stored the key. Keys are exchanged and entered electronically or via Internet Key Exchange (IKE)/Group Domain of Interpretation (GDOI). The module does not output keys or key components in plaintext form. The module supports the following critical security parameters (CSPs): ID Algorithm Size Description Storage Zeroization Method 64-bits RNG Seed X9.31 This is the seed for X9.31 RNG. This CSP is DRAM Automatically every stored in DRAM and updated periodically (plaintext) 400 bytes, or turn off after the generation of 400 bytes – after this the router. it is reseeded with router-derived entropy; hence, it is zeroized periodically. Also, the operator can turn off the router to zeroize this CSP. X9.31 128-bits This is the seed key for the RNG. Turn off the router RNG Seed Key DRAM (plaintext) 1024 – Diffie Hellman DH The private exponent used in Diffie-Hellman DRAM Automatically after private exponent 2048 bits (DH) exchange. Zeroized after DH shared (plaintext) shared secret secret has been generated. generated. Diffie Hellman DH 1024- Shared secret generated by the Diffie-Hellman DRAM Automatically after Shared Secret bits/2048- Key exchange (plaintext) session is terminated bits 160-bits Skeyid Keyed SHA-1 Value derived from the shared secret within DRAM Automatically after IKE exchange. Zeroized when IKE session is (plaintext) IKE session terminated. terminated. 160-bits skeyid_d Keyed SHA-1 The IKE key derivation key for non DRAM Automatically after ISAKMP security associations. (plaintext) IKE session terminated. 168- IKE session encrypt Triple-DES/AES The IKE session encrypt key. DRAM Automatically after key (plaintext) IKE session bits/256- terminated. bits 160-bits IKE session SHA-1 HMAC The IKE session authentication key. DRAM Automatically after authentication key (plaintext) IKE session terminated. At least ISAKMP preshared Secret The key used to generate IKE skeyid during NVRAM “# no crypto isakmp preshared-key authentication. “no crypto (plaintext or key” eight isakmp key” command zeroizes it. This key encrypted) character can have two forms based on whether the s key is related to the hostname or the IP address. RSA 1024 – RSA private key for IKE authentication. NVRAM “# crypto key IKE RSA Authentication 2048 bits Generated or entered like any RSA key, (plaintext) zeroize rsa" private Key set as IKE RSA Authentication Key with the “crypto keyring” or “ca trust- 13 point” command. 168- IPSec encryption Triple-DES/AES The IPSec encryption key. Zeroized when DRAM Automatically when key bits/256- IPSec session is terminated. (plaintext) IPSec session terminated. bits 160-bits IPSec authentication SHA-1 HMAC The IPSec authentication key. The DRAM Automatically when key zeroization is the same as above. (plaintext) IPSec session terminated. AES (128, 192 168- This key is created using the “GROUPKEY- DRAM Automatically GDOI Key encryption Key bits/256- PULL” registration protocol with GDOI. It (plaintext) and 256 bits) when session (KEK) is used protect GDOI rekeying data.” bits terminated. Triple-DES/AES 168- This key is created using the “GROUPKEY- DRAM Automatically GDOI Traffic Encryption Key bits/256- PULL” registration protocol and updated when session (plaintext) (TEK) using the “GROUPKEY-PUSH” registration bits terminated. protocol with GDOI. It is used to encrypt data traffic between Get VPN peers HMAC SHA-1 160-bits This key is created using the “GROUPKEY- DRAM Automatically GDOI TEK Integrity key PULL” registration protocol and updated when session (plaintext) using the “GROUPKEY-PUSH” registration terminated. protocol with GDOI. It is used to ensure data traffic integrity between Get VPN peers. RSA 1024/153 Identity certificates for module itself and Automatically TLS Server RSA NVRAM private key also used in TLS negotiations. This CSP is (plaintext or 6/2048 when session used for both SSL VPN and SIP Gateway encrypted) terminated. Signaling Over TLS Transport. Shared Secret 384-bits DRAM Automatically TLS pre-master Shared secret created using asymmetric secret cryptography from which new HTTPS when session (plaintext) session keys can be created. This CSP is terminated. used for both SSL VPN and SIP Gateway Signaling Over TLS Transport. Triple-DES/AES 160- DRAM Automatically SSL Traffic Keys Generated using the TLS protocol (X9.31RNG + HMAC-SHA1 + either Diffie- (plaintext) bits/168- when session HMAC SHA-1 Hellman or RSA). This CSP is used for both keys bits/256- terminated. SSL VPN and SIP Gateway Signaling Over bits TLS Transport. Configuration AES 256-bits The key used to encrypt values of the NVRAM “# no key config- encryption key configuration file. This key is zeroized when (plaintext or key” the “no key config-key” is issued. Note that encrypted) this command does not decrypt the configuration file, so zeroize with care. SSH RSA private DH 168- Shared secret generated by the Diffie- DRAM Automatically after key bits/256- Hellman Key (plaintext) session is terminated bits exchange Triple-DES/AES 160- SSH session key This is the SSH session key. It is zeroized DRAM Automatically when bits/168- when the SSH session is terminated. (plaintext) SSH session HMAC SHA-1 terminated keys bits/256- bits At least The password of the User role. This User password Shared NVRAM Overwrite with new Secret password is zeroized by overwriting it with a (plaintext or password eight character new password. encrypted) s At least Enable password Shared The plaintext password of the CO role. This NVRAM Overwrite with new Secret password is zeroized by overwriting it with a (plaintext or password eight 14 character new password. encrypted) s At least Enable secret Shared The ciphertext password of the CO role. NVRAM Overwrite with new Secret However, the algorithm used to encrypt this (plaintext or password eight password is not FIPS approved. Therefore, encrypted) character this password is considered plaintext for s FIPS purposes. This password is zeroized by overwriting it with a new password. At least The RADIUS shared secret. This shared RADIUS secret Shared NVRAM “# no radius-server Secret secret is zeroized by executing the “no (plaintext or key” eight character radius-server key” command. encrypted), DRAM s (plaintext) At least The TACACS+ shared secret. This shared TACACS+ secret Shared NVRAM “# no tacacs-server Secret secret is zeroized by executing the “no (plaintext or key” eight character tacacs-server key” command. encrypted), DRAM s (plaintext) Table 9: CSP Table The services accessing the CSPs, the type of access and which role accesses the CSPs are listed below. GDOI Traffic Encryption Key (TEK) IKE RSA Authentication private Key GDOI Key encryption Key (KEK) Diffie Hellman private exponent IKE session authentication key Diffie Hellman Shared Secret Configuration encryption key TLS Server RSA Private Key GDOI TEK Integrity Key IPSec authentication key IKE session encrypt key TLS pre-master Secret SSH RSA Private Key IPSec encryption key ISAKMP preshared TACACS+ secret Enable password SSL Traffic Key SSH session key RADIUS secret RNG Seed Key User password Enable secret RNG Seed skeyid_d Skeyid CSP Role/Service User Role Status Function r r r r r r r r r r r r r r r r r r r r r Network Function Terminal Function Directory Services Perform Self- tests r r r r r r r r r r r r r r r VPN Function w w w w w w w w w w w w w w w d d d d d d d d d d d d d d d CO Role r r Configure the w w module d Define Rules 15 and Filters Status Functions d d r r r r r r Manage the w w w w w w module d d d d d d r r r r r r r r r r r r r r r r r r r Set w w w w w w w w w w w w w w w w w w w Encryption/ d d d d d d d d d d d d d d d d d d d Bypass Perform Self- tests r = read w = write d = delete Table 10: Role CSP Access 16 Cryptographic Algorithms Approved Cryptographic Algorithms The Cisco 1905, Cisco 1921, Cisco 1941, Cisco 2901, Cisco 2911, and Cisco 2921 Integrated Services Routers (ISRs) support many different cryptographic algorithms. However, only FIPS approved algorithms may be used while in the FIPS mode of operation. The following table identifies the approved algorithms included in the Cisco 1905, Cisco 1921, Cisco 1941, Cisco 2901, Cisco 2911, and Cisco 2921 Integrated Services Routers (ISRs) for use in the FIPS mode of operation. Algorithm IOS Cert. # OCTEON Plus CN5200 Series Die Accelerator Cert. # AES #1527 #1115 SHS (SHA-1, SHA256 and SHA 512) #1359 #1038 HMAC SHA-1 #891 #627 RNG (ANSI X9.31) #823 N/A Triple-DES #1010 #812 RSA #743 N/A Table 11: FIPS-Approved Algorithms for use in FIPS Mode Non-Approved Algorithms The Cisco 1905, Cisco 1921, Cisco 1941, Cisco 2901, Cisco 2911, and Cisco 2921 Integrated Services Routers (ISRs) cryptographic module implements the following non- Approved algorithms: MD5 • DES, • HMAC-MD5 • RC4 • The modules support the following key establishment schemes: Diffie-Hellman (key establishment methodology provides between 80 and 112 • bits of encryption strength) RSA key transport (key establishment methodology provides between 80 and 112 • bits of encryption strength) Internet Key Exchange Key Establishment (IKEv1/IKEv2) • Group Domain of Interpretation (GDOI) • Self-Tests The modules include an array of self-tests that are run during startup and periodically during operations to prevent any secure data from being released and to insure all 17 components are functioning correctly. The modules implement the following power-on self-tests: IOS Known Answer Tests: AES KAT, SHS KAT, HMAC KAT, Triple-DES • KAT, RNG KAT, RSA KAT OCTEON Plus CN5200 Series Die Accelerator Known Answer Tests: AES KAT, • HMAC KAT, Triple-DES KAT Firmware Integrity Test (32-bit CRC) • The modules perform all power-on self-tests automatically at boot. All power-on self- tests must be passed before any operator can perform cryptographic services. The power- on self-tests are performed after the cryptographic systems are initialized but prior any other operations; this prevents the module from passing any data during a power-on self- test failure. In addition, the modules also provide the following conditional self-tests: CRNG test for the FIPS-approved RNG • CRNG tests for the non-approved RNG • RSA PWCT • Bypass Test • 18 Physical Security This module is a multi-chip standalone cryptographic module. The FIPS 140-2 level 2 physical security requirements for the modules are met by the use of opacity shields covering the front panels of modules to provide the required opacity and tamper evident seals to provide the required tamper evidence. The tamper evident labels and opacity shields shall be installed for the module to operate in a FIPS Approved mode of operation. The following sections illustrate the physical security provided by the module. Module Opacity and Tamper Evidence All Critical Security Parameters are stored and protected within each module's tamper evident enclosure. The Crypto Officer is responsible for properly placing all tamper evident labels. The security labels recommended for FIPS 140-2 compliance are provided in the FIPS Kit (Part Number CISCO-FIPS-KIT=), Revision -B0. The FIPS kit includes 15 of the seals, as well as a document detailing the number of seals required per platform and placement information. Please be aware that the extra tamper evident labels/seals shall be securely stored by the Crypto Officer. These security labels are very fragile and cannot be removed without clear signs of damage to the labels. The routers also require that a special opacity shield be installed over the side air vents in order to operate in FIPS-approved mode. The shield decreases the surface area of the vent holes, reducing visibility within the cryptographic boundary to FIPS-approved specifications. These are obtained by ordering the appropriate FIPS shield, as follows: Cisco 1905 ISR: FIPS-SHIELD-1900= • Cisco 1921 ISR: FIPS-SHIELD-1900= • Cisco 1941 ISR: FIPS-SHIELD-1900= • Cisco 2921 ISR: FIPS-SHIELD-2921= • Cisco 2911 ISR: FIPS-SHIELD-2911= • Cisco 2901 ISR: FIPS-SHIELD-2901= • Once the module has been configured to meet overall FIPS 140-2 Level 2 requirements, the module cannot be accessed without signs of tampering. The Crypto Officer should inspect the tamper evident labels periodically to verify they are intact and the serial numbers on the applied tamper evident labels match the records in the security log. The Tamper evident labels shall be applied as shown in the pictures below, for the module to operate in FIPS mode. Module Number of Tamper Seals Cisco 1905 ISR 10 Cisco 1921 ISR 10 Cisco 1941 ISR 13 19 Cisco 2901 ISR 13 Cisco 2911 ISR 23 (two FIPS Kits (CISCO-FIPS-KIT=) required) Cisco 2921 ISR 31 (three FIPS Kits (CISCO-FIPS-KIT=) required) Install the opacity plates and apply serialized tamper-evidence labels as specified in the pictures below: Figure 1: Cisco 1905 ISR Front Figure 2: Cisco 1905 ISR Back 20 Figure 3: Cisco 1905 ISR Top Figure 4: Cisco 1905 ISR Bottom 21 Figure 5: Cisco 1905 ISR Right Side Figure 6: Cisco 1905 ISR Left Side Figure 7: Cisco 1921 ISR Front 22 Figure 8: Cisco 1921 ISR Back Figure 9: Cisco 1921 ISR Top 23 Figure 10: Cisco 1921 ISR Bottom Figure 11: Cisco 1921 ISR Right Side 24 Figure 12: Cisco 1921 ISR Left Side Figure 13: Cisco 1941 ISR Front 25 Figure 14: Cisco 1941 ISR Back Figure 15: Cisco 1941 ISR Top 26 Figure 16: Cisco 1941 ISR Bottom Figure 17: Cisco 1941 ISR Right Side 27 Figure 18: Cisco 1941 ISR Left Side Figure 19: Cisco 2901 ISR Front 28 Figure 20: Cisco 2901 ISR Back Figure 21: Cisco 2901 ISR Top 29 Figure 22: Cisco 2901 ISR Bottom Figure 23: Cisco 2901 ISR Right Side 30 Figure 24: Cisco 2901 ISR Left Side Figure 25: Cisco 2911 ISR Front Figure 26: Cisco 2911 ISR Back 31 Figure 27: Cisco 2911 ISR Top Figure 28: Cisco 2911 ISR Bottom 32 Figure 29: Cisco 2911 ISR Right Side Figure 30: Cisco 2911 ISR Left Side 33 Figure 31: Cisco 2921 ISR Front Figure 32: Cisco 2921 ISR Back Figure 33: Cisco 2921 ISR Top 34 Figure 34: Cisco 2921 ISR Bottom Figure 35: Cisco 2921 ISR Right Side 35 Figure 36: Cisco 2921 ISR Left Side 36 Secure Operation The Cisco 1905, Cisco 1921, Cisco 1941, Cisco 2901, Cisco 2911, and Cisco 2921 Integrated Services Routers (ISRs) meet all the overall Level 2 requirements for FIPS 140-2. Follow the setting instructions provided below to place the module in FIPS- approved mode. Operating this router without maintaining the following settings will remove the module from the FIPS approved mode of operation. Initial Setup 1. The Crypto Officer must install the FIPS opacity shields as described in this document. 2. The Crypto Officer must apply tamper evidence labels as described in this document. 3. The Crypto Officer must disable IOS Password Recovery by executing the following commands: configure terminal no service password-recovery end show version NOTE: Once Password Recovery is disabled, administrative access to the module without the password will not be possible. System Initialization and Configuration 1. The value of the boot field must be 0x0102. This setting disables break from the console to the ROM monitor and automatically boots. From the “configure terminal” command line, the Crypto Officer enters the following syntax: config-register 0x0102 2. The Crypto Officer must create the “enable” password for the Crypto Officer role. Procedurally, the password must be at least 8 characters, including at least one letter and at least one number, and is entered when the Crypto Officer first engages the “enable” command. The Crypto Officer enters the following syntax at the “#” prompt: enable secret [PASSWORD] 3. The Crypto Officer must always assign passwords (of at least 8 characters, including at least one letter and at least one number) to users. Identification and authentication on the console/auxiliary port is required for Users. From the “configure terminal” command line, the Crypto Officer enters the following syntax: line con 0 password [PASSWORD] login local 4. The Crypto Officer may configure the module to use RADIUS or TACACS+ for authentication. Configuring the module to use RADIUS or TACACS+ for 37 authentication is optional. If the module is configured to use RADIUS or TACACS+, the Crypto-Officer must define RADIUS or TACACS+ shared secret keys that are at least 8 characters long, including at least one letter and at least one number. 5. Firmware update is not allowed in FIPS mode. IPSec Requirements and Cryptographic Algorithms 1. The only types of IPSec key management that are allowed in FIPS mode is Internet Key Exchange (IKE) and Group Domain of Interpretation (GDOI). 2. Although the IOS implementation of IKE allows a number of algorithms, only the following algorithms are allowed in a FIPS 140-2 configuration: ah-sha-hmac • esp-sha-hmac • esp-3des • esp-aes • esp-aes-192 • esp-aes-256 • 3. The following algorithms shall not be used: MD-5 for signing • MD-5 HMAC • DES • Protocols 1. SNMP v3 over a secure IPSec tunnel may be employed for authenticated, secure SNMP gets and sets. Since SNMP v2C uses community strings for authentication, only gets are allowed under SNMP v2C. Remote Access 1. SSH access to the module is allowed in FIPS approved mode of operation, using SSH v2 and a FIPS approved algorithm. 2. Telnet access to the module is only allowed via a secure IPSec tunnel between the remote system and the module. The Crypto officer must configure the module so that any remote connections via telnet are secured through IPSec, using FIPS-approved algorithms. Note that all users must still authenticate after remote access is granted. 3. HTTPS/TLS management is not allowed in FIPS mode Wireless Services 1. Wireless communication with the module is allowed not in FIPS approved mode of operation. 2. Be default, the radio interfaces for the module are disabled. These interfaces should not be enabled. 38 Cisco Unified Border Element (CUBE) TLS Configuration 1. When configuring CUBE TLS connections, the following configuration command option must be executed to limit the TLS session options to FIPS-approved algorithms. crypto signaling [strict-cipher] 39 Related Documentation This document deals only with operations and capabilities of the security appliances in the technical terms of a FIPS 140-2 cryptographic device security policy. More information is available on the security appliances from the sources listed in this section and from the following source: The NIST Cryptographic Module Validation Program website • (http://csrc.nist.gov/groups/STM/cmvp/index.html) contains contact information for answers to technical or sales-related questions for the security appliances. Obtaining Documentation Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems. Cisco.com You can access the most current Cisco documentation at this URL: http://www.cisco.com/techsupport You can access the Cisco website at this URL: http://www.cisco.com You can access international Cisco websites at this URL: http://www.cisco.com/public/countries_languages.shtml Product Documentation DVD Cisco documentation and additional literature are available in the Product Documentation DVD package, which may have shipped with your product. The Product Documentation DVD is updated regularly and may be more current than printed documentation. The Product Documentation DVD is a comprehensive library of technical product documentation on portable media. The DVD enables you to access multiple versions of hardware and software installation, configuration, and command guides for Cisco products and to view technical documentation in HTML. With the DVD, you have access to the same documentation that is found on the Cisco website without being connected to the Internet. Certain products also have .pdf versions of the documentation available. The Product Documentation DVD is available as a single unit or as a subscription. Registered Cisco.com users (Cisco direct customers) can order a Product Documentation DVD (product number DOC-DOCDVD=) from Cisco Marketplace at this URL: http://www.cisco.com/go/marketplace/ Ordering Documentation Beginning June 30, 2005, registered Cisco.com users may order Cisco documentation at the Product Documentation Store in the Cisco Marketplace at this URL: 40 http://www.cisco.com/go/marketplace/ Nonregistered Cisco.com users can order technical documentation from 8:00 a.m. to 5:00 p.m. (0800 to 1700) PDT by calling 1 866 463-3487 in the United States and Canada, or elsewhere by calling 011 408 519-5055. You can also order documentation by e-mail at tech-doc-store-mkpl@external.cisco.com or by fax at 1 408 519-5001 in the United States and Canada, or elsewhere at 011 408 519-5001. Documentation Feedback You can rate and provide feedback about Cisco technical documents by completing the online feedback form that appears with the technical documents on Cisco.com. You can send comments about Cisco documentation to bug-doc@cisco.com. You can submit comments by using the response card (if present) behind the front cover of your document or by writing to the following address: Cisco Systems Attn: Customer Document Ordering 170 West Tasman Drive San Jose, CA 95134-9883 We appreciate your comments. Cisco Product Security Overview Cisco provides a free online Security Vulnerability Policy portal at this URL: http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html From this site, you can perform these tasks: Report security vulnerabilities in Cisco products. • Obtain assistance with security incidents that involve Cisco products. • Register to receive security information from Cisco. • A current list of security advisories and notices for Cisco products is available at this URL: http://www.cisco.com/go/psirt If you prefer to see advisories and notices as they are updated in real time, you can access a Product Security Incident Response Team Really Simple Syndication (PSIRT RSS) feed from this URL: http://www.cisco.com/en/US/products/products_psirt_rss_feed.html Reporting Security Problems in Cisco Products Cisco is committed to delivering secure products. We test our products internally before we release them, and we strive to correct all vulnerabilities quickly. If you think that you might have identified a vulnerability in a Cisco product, contact PSIRT: 41 Emergencies — security-alert@cisco.com • An emergency is either a condition in which a system is under active attack or a condition for which a severe and urgent security vulnerability should be reported. All other conditions are considered nonemergencies. Nonemergencies — psirt@cisco.com • In an emergency, you can also reach PSIRT by telephone: 1 877 228-7302 • 1 408 525-6532 • Tip We encourage you to use Pretty Good Privacy (PGP) or a compatible product to encrypt any sensitive information that you send to Cisco. PSIRT can work from encrypted information that is compatible with PGP versions 2.x through 8.x. Never use a revoked or an expired encryption key. The correct public key to use in your correspondence with PSIRT is the one linked in the Contact Summary section of the Security Vulnerability Policy page at this URL: http://www.cisco.com/en/US/products/products_security_vulnerability_policy.html The link on this page has the current PGP key ID in use. Obtaining Technical Assistance Cisco Technical Support provides 24-hour-a-day award-winning technical assistance. The Cisco Technical Support & Documentation website on Cisco.com features extensive online support resources. In addition, if you have a valid Cisco service contract, Cisco Technical Assistance Center (TAC) engineers provide telephone support. If you do not have a valid Cisco service contract, contact your reseller. Cisco Technical Support & Documentation Website The Cisco Technical Support & Documentation website provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The website is available 24 hours a day, at this URL: http://www.cisco.com/techsupport Access to all tools on the Cisco Technical Support & Documentation website requires a Cisco.com user ID and password. If you have a valid service contract but do not have a user ID or password, you can register at this URL: http://tools.cisco.com/RPF/register/register.do Note Use the Cisco Product Identification (CPI) tool to locate your product serial number before submitting a web or phone request for service. You can access the CPI tool from the Cisco Technical Support & Documentation website by clicking the Tools & Resources link under Documentation & Tools. Choose Cisco Product Identification 42 Tool from the Alphabetical Index drop-down list, or click the Cisco Product Identification Tool link under Alerts & RMAs. The CPI tool offers three search options: by product ID or model name; by tree view; or for certain products, by copying and pasting show command output. Search results show an illustration of your product with the serial number label location highlighted. Locate the serial number label on your product and record the information before placing a service call. Submitting a Service Request Using the online TAC Service Request Tool is the fastest way to open S3 and S4 service requests. (S3 and S4 service requests are those in which your network is minimally impaired or for which you require product information.) After you describe your situation, the TAC Service Request Tool provides recommended solutions. If your issue is not resolved using the recommended resources, your service request is assigned to a Cisco engineer. The TAC Service Request Tool is located at this URL: http://www.cisco.com/techsupport/servicerequest For S1 or S2 service requests or if you do not have Internet access, contact the Cisco TAC by telephone. (S1 or S2 service requests are those in which your production network is down or severely degraded.) Cisco engineers are assigned immediately to S1 and S2 service requests to help keep your business operations running smoothly. To open a service request by telephone, use one of the following numbers: Asia-Pacific: +61 2 8446 7411 (Australia: 1 800 805 227)EMEA: +32 2 704 55 55USA: 1 800 553-2447 For a complete list of Cisco TAC contacts, go to this URL: http://www.cisco.com/techsupport/contacts Definitions of Service Request Severity To ensure that all service requests are reported in a standard format, Cisco has established severity definitions. Severity 1 (S1) – Your network is “down,” or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation. Severity 2 (S2) – Operation of an existing network is severely degraded, or significant aspects of your business operation are negatively affected by inadequate performance of Cisco products. You and Cisco will commit full-time resources during normal business hours to resolve the situation. Severity 3 (S3) – Operational performance of your network is impaired, but most business operations remain functional. You and Cisco will commit resources during normal business hours to restore service to satisfactory levels. Severity 4 (S4) – You require information or assistance with Cisco product capabilities, installation, or configuration. There is little or no effect on your business operations. 43 Obtaining Additional Publications and Information Information about Cisco products, technologies, and network solutions is available from various online and printed sources. Cisco Marketplace provides a variety of Cisco books, reference guides, • documentation, and logo merchandise. Visit Cisco Marketplace, the company store, at this URL: http://www.cisco.com/go/marketplace/ Cisco Press publishes a wide range of general networking, training and • certification titles. Both new and experienced users will benefit from these publications. For current Cisco Press titles and other information, go to Cisco Press at this URL: http://www.ciscopress.com Packet magazine is the Cisco Systems technical user magazine for maximizing • Internet and networking investments. Each quarter, Packet delivers coverage of the latest industry trends, technology breakthroughs, and Cisco products and solutions, as well as network deployment and troubleshooting tips, configuration examples, customer case studies, certification and training information, and links to scores of in-depth online resources. You can access Packet magazine at this URL: http://www.cisco.com/packet iQ Magazine is the quarterly publication from Cisco Systems designed to help • growing companies learn how they can use technology to increase revenue, streamline their business, and expand services. The publication identifies the challenges facing these companies and the technologies to help solve them, using real-world case studies and business strategies to help readers make sound technology investment decisions. You can access iQ Magazine at this URL: http://www.cisco.com/go/iqmagazine or view the digital edition at this URL: • http://ciscoiq.texterity.com/ciscoiq/sample/ Internet Protocol Journal is a quarterly journal published by Cisco Systems for • engineering professionals involved in designing, developing, and operating public and private internets and intranets. You can access the Internet Protocol Journal at this URL: http://www.cisco.com/ipj Networking products offered by Cisco Systems, as well as customer support • services, can be obtained at this URL: http://www.cisco.com/en/US/products/index.html Networking Professionals Connection is an interactive website for networking • professionals to share questions, suggestions, and information about networking 44 products and technologies with Cisco experts and other networking professionals. Join a discussion at this URL: http://www.cisco.com/discuss/networking World-class networking training is available from Cisco. You can view current • offerings at this URL: http://www.cisco.com/en/US/learning/index.html Definition List AES – Advanced Encryption Standard CMVP – Cryptographic Module Validation Program CSEC – Communications Security Establishment Canada CSP – Critical Security Parameter FIPS – Federal Information Processing Standard HMAC – Hash Message Authentication Code HTTP – Hyper Text Transfer Protocol KAT – Known Answer Test LED – Light Emitting Diode MAC – Message Authentication Code NIST – National Institute of Standards and Technology NVRAM – Non-Volatile Random Access Memory RAM – Random Access Memory RNG – Random Number Generator RSA – Rivest Shamir and Adleman method for asymmetric encryption SHA – Secure Hash Algorithm TDES – Triple Data Encryption Standard 45